00-05 Toyota MR2 Spyder Left LH Driver Front Knuckle Bearing Hub Caliper 0189
00-05 Toyota MR2 Spyder Left LH Driver Front Knuckle Bearing Hub Caliper 0189
Item Details
VIN must be 17 characters and cannot contain I, O, or Q.
Left, driver side front knuckle assembly from a 2001 Toyota MR2 Spyder with 96,118 miles. This includes the knuckle, hub, dust shield, brake caliper and ABS sensor/wire. This was carefully removed from an un-wrecked vehicle and has no bent or broken parts. The wheel bearing made no abnormal noise or had any play when removed from the vehicle, but we do not guarantee the bearing to be good and may need replaced. The assembly has some typical surface rust and normal wear, but this does not affect its functionality and overall looks good. The ABS sensor, wire and connector is attached and undamaged. It is recommended that the brake pads and rotor be replaced before use. The images are of the actual item you will receive.
Fits 2000-2005 Toyota MR2 Spyder ONLY.
No shipping outside the lower 48 states. No P.O. Boxes.
Compatible Vehicles
| Notes | Make | Model | Year | Trim | Engine |
|---|---|---|---|---|---|
| Toyota | mr2 spyder | 2005 | base convertible 2-door | 1.8l 1794cc l4 gas dohc naturally aspirated | |
| Toyota | mr2 spyder | 2004 | base convertible 2-door | 1.8l 1794cc l4 gas dohc naturally aspirated | |
| Toyota | mr2 spyder | 2003 | base convertible 2-door | 1.8l 1794cc l4 gas dohc naturally aspirated | |
| Toyota | mr2 spyder | 2002 | base convertible 2-door | 1.8l 1794cc l4 gas dohc naturally aspirated | |
| Toyota | mr2 spyder | 2001 | base convertible 2-door | 1.8l 1794cc l4 gas dohc naturally aspirated | |
| Toyota | mr2 spyder | 2000 | base convertible 2-door | 1.8l 1794cc l4 gas dohc naturally aspirated |